Top Hats & Ceiling Battens | Steel Framing & Ceiling Systems

Category Steel Framing & Ceiling Systems

Type Battens & Sub-Framing

Brand

Variants 32 available

Availability In Stock

Delivery Australia-wide

Variants

32 of 32

50mm (face) x 15mm (h) x 18mm (flange) Top Hat - 1.15bmt (3.6m, 6m) Request
50mm (face) x 25mm (h) x 18mm (flange) Top Hat - 1.15bmt (3.6m, 6m) Request
50mm (face) x 35mm (h) x 18mm (flange) Top Hat - 1.15bmt (3.6m, 6m, 7.2m) Request
50mm (face) x 45mm (h) x 19mm (flange) Top Hat - 1.15bmt (3.6m, 6m) Request
50mm (face) x 50mm (h) x 18mm (flange) Top Hat - 1.15bmt (3.6m, 6m) Request
50mm (face) x 60mm (h) x 18mm (flange) Top Hat - 1.15bmt (3.6m, 6m) Request
75mm (face) x 15mm (h) x 17mm (flange) Top Hat - 1.15bmt (3.6m, 6m) Request
75mm (face) x 25mm (h) x 19mm (flange) Top Hat - 1.15bmt (3.6m, 6m) Request
75mm (face) x 35mm (h) x 20mm (flange) Top Hat - 1.15bmt (3.6m, 6m) Request
75mm (face) x 50mm (h) x 20mm (flange) Top Hat - 1.15bmt (3.6m, 6m) Request
50mm (face) x 15mm (h) x 18mm (flange) Top Hat - 0.75bmt (3.6m, 6m) Request
50mm (face) x 25mm (h) x 19mm (flange) Top Hat - 0.75bmt (3.6m, 6m) Request
50mm (face) x 35mm (h) x 19mm (flange) Top Hat - 0.75bmt (3.6m, 6m, 7.2m) Request
50mm (face) x 45mm (h) x 18mm (flange) Top Hat - 0.75bmt (3.6m, 6m) Request
50mm (face) x 50mm (h) x 19mm (flange) Top Hat - 0.75bmt (3.6m, 6m) Request
50mm (face) x 60mm (h) x 18mm (flange) Top Hat - 0.75bmt (3.6m, 6m) Request
75mm (face) x 15mm (h) x 20mm (flange) Top Hat - 0.75bmt (3.6m, 6m) Request
75mm (face) x 25mm (h) x 19mm (flange) Top Hat - 0.75bmt (3.6m, 6m) Request
75mm (face) x 35mm (h) x 19mm (flange) Top Hat - 0.75bmt (3.6m, 6m) Request
75mm (face) x 50mm (h) x 20mm (flange) Top Hat - 0.75bmt (3.6m, 6m) Request
50mm (face) x 15mm (h) x 18mm (Flange) Top Hat - 1.15bmt - Z450 (3.6m, 6m) Request
50mm (face) x 25mm (h) x 18mm (Flange) Top Hat - 1.15bmt - Z450 (3.6m, 6m) Request
50mm (face) x 35mm (h) x 18mm (Flange) Top Hat - 1.15bmt - Z450 (3.6m, 6m) Request
50mm (face) x 50mm (h) x 18mm (Flange) Top Hat - 1.15bmt - Z450 (3.6m, 6m) Request
16mm (h) x 36mm (w) Ceiling Batten - 0.42bmt (4.8m, 6m) Request
24mm (h) x 30mm (face) Cyclonic Ceiling Batten - 0.42bmt (4.8m, 6.1m) Request
35mm (h) x 40mm (face) Ceiling Batten - 0.55bmt (3.6m, 4.8m, 6m) Request
150mm (h) x 40mm (w) DFC - 301 Ceiling Batten to Timber/Steel Request
92mm (h) x 44mm (w) DFC - 301 Ceiling Batten to Timber/Steel at 90 ° Angle Request
92mm (h) x 40mm (w) DFC with Positioning Tab - 301 Ceiling Batten to Timber/Steel Request
103mm (l) x 36mm (w) Section Joiner - suits 301 Ceiling Batten Request
113mm (h) x 40mm (w)Swivel Direct Fix Clip - 301 Ceiling Batten to Timber/Steel Request

Frequently asked questions

What are top hat sections used for?

Top hats are hat-shaped steel profiles used as sub-framing: lining over masonry, framing soffits and fascias, and spanning between structural members where a batten is not stiff enough. We stock 50mm and 75mm face profiles in heights from 15mm up, in 0.55, 0.75, and 1.15bmt, with lengths up to 7.2m.

What is the difference between a ceiling batten and a furring channel?

Both carry plasterboard, but battens direct-fix to the structure while furring channels clip into a suspended KEY-LOCK system. If the ceiling fixes straight to joists, rafters, or slab soffit, use battens. If the ceiling hangs below the structure, use the KEY-LOCK furring channel system.

Does Rondo product bought through Birak count toward my Indigenous procurement target?

Yes. Birak is Supply Nation Registered, so every dollar you spend on top hats and battens through Birak counts toward Commonwealth IPP and state Indigenous procurement targets. We supply audit-ready procurement documentation with every invoice.