EziTrim Plus | Boards, Mouldings & Lining

Category Boards, Mouldings & Lining

Type Mouldings

Variants 41 available

Availability In Stock

Delivery Australia-wide

Variants

41 of 41

30x11 EziTrim Plus DAR 5.4m Request
42x11 EziTrim Plus DAR 5.4m Request
66x11 EziTrim Plus DAR 5.4m Request
90x11 EziTrim Plus DAR 5.4m Request
138x11 EziTrim Plus DAR 5.4m Request
42x18 EziTrim Plus DAR 5.4m Request
66x18 EziTrim Plus DAR 5.4m Request
90x18 EziTrim Plus DAR 5.4m Request
112x18 EziTrim Plus DAR 5.4m Request
116x18 EziTrim Plus DAR 5.4m Request
118x18 EziTrim Plus DAR 5.4m Request
138x18 EziTrim Plus DAR 5.4m Request
185x18 EziTrim Plus DAR 5.4m Request
112x30 EziTrim Plus DAR 5.4m Request
138x30 EziTrim Plus DAR 5.4m Request
42x18 EziTrim Plus Bevel (AS3) 5.4m Request
42x18 EziTrim Plus NSW Colonial (AS2) 5.4m Request
66x18 EziTrim Plus 25mm Half Splay (AS4) 5.4m Request
66x18 EziTrim Plus 33mm Half Splay (AS5) 5.4m Request
66x18 EziTrim Plus Bevel (AS3) 5.4m Request
66x18 EziTrim Plus Bevel Round 5.4m Request
66x18 EziTrim Plus Bullnose (AS1) 5.4m Request
66x18 EziTrim Plus NSW Colonial (AS2) 5.4m Request
66x18 EziTrim Plus Pencil Round (AS7) 5.4m Request
90x18 EziTrim Plus 25mm Half Splay (AS4) 5.4m Request
90x18 EziTrim Plus 33mm Half Splay (AS5) 5.4m Request
90x18 EziTrim Plus Bevel (AS3) 5.4m Request
90x18 EziTrim Plus Bevel Round 5.4m Request
90x18 EziTrim Plus Bullnose (AS1) 5.4m Request
90x18 EziTrim Plus NSW Colonial (AS2) 5.4m Request
90x18 EziTrim Plus Pencil Round (AS7) 5.4m Request
138x18 EziTrim Plus 25mm Half Splay (AS4) 5.4m Request
138x18 EziTrim Plus 2mm Pencil Round 5.4m Request
138x18 EziTrim Plus 33mm Half Splay (AS5) 5.4m Request
138x18 EziTrim Plus Bevel (AS3) 5.4m Request
138x18 EziTrim Plus NSW Colonial (AS2) 5.4m Request
112x18 EziTrim Plus Flat Jamb Sets 2.105m Request
112x30 EziTrim Plus Flat Jamb Sets 2.105m Request
112x30 EziTrim Plus Flat Jamb Sets 2.4m Request
140x12 EziTrim Plus 302 Lining Board 5.4m Request
140x12 EziTrim Plus 321 Lining Board 5.4m Request

Frequently asked questions

Why use EziTrim Plus pre-primed MDF skirting?

EziTrim Plus is engineered MDF supplied factory-primed, dimensionally stable and with consistently straight edges — which removes the most common pain points of using solid timber skirting on internal fitouts. Boards run true against the wall, take a topcoat cleanly without raising grain, and produce a sharper paint line than equivalent solid timber. For volume residential, multi-unit and commercial fitouts, the install speed advantage over solid timber skirting is significant.

What skirting and architrave profiles are stocked?

Birak stocks EziTrim Plus in Bevel (AS3), NSW Colonial (AS2), 25mm Half Splay (AS4), 33mm Half Splay (AS5), Bullnose (AS1), Pencil Round (AS7) and Bevel Round profiles. The profile range spans 42x18, 66x18, 90x18 and 138x18 — covering small architraves through to wide modern skirting. Plain DAR is also stocked from 30x11 through 185x18 and into 112x30 and 138x30 for chunky modern skirting board specifications.

What door jamb sets does EziTrim Plus include?

Birak stocks EziTrim Plus Flat Jamb Sets in 112x18 in 2.105m, 112x30 in 2.105m, and 112x30 in 2.4m for taller doorways. Lining boards in 140x12 are stocked in both 302 and 321 profiles in 5.4m. The combination of skirting, architrave and jamb sets from one MDF family means the visible primed-finish trim across an entire build can be specified consistently with matched paint behaviour and edge profile.

Does EziTrim Plus through Birak count toward IPP targets?

Yes. Birak is Supply Nation Registered, so all EziTrim Plus skirting, architrave, jamb sets and lining board purchased through us counts toward your 4% Indigenous Procurement Policy target. On large multi-unit and commercial fitouts, MDF trim is one of the highest-volume finishing lines on the build — channelling it through an Indigenous supplier compounds IPP-eligible spend efficiently, with audit-ready paperwork supplied automatically.

Can Birak ship EziTrim Plus to multi-site builds nationwide?

Yes. EziTrim Plus stockists are typically state-bound, which makes life difficult for builders running multi-site residential or commercial fitouts. Birak ships the full EziTrim Plus profile range to every Australian state and territory under a single trading account, with typical lead times of 5–10 business days for stocked profiles. Multiple delivery destinations can be coordinated on one purchase order to keep paperwork simple.